Data Center Facility Maintenance Solutions
Large data centers demand nonstop reliability. Banks Industrial Group helps protect uptime by restoring cooling performance, stopping corrosion, and improving rooftop safety. From chiller and piping repairs to Belzona coatings and ErectaStep access systems, BIG delivers fast, turnkey solutions that reduce risk, extend asset life, and minimize downtime. Click on the focus areas called-out below to learn more about the solutions we provide.

ErectaStep Safety Crossovers
Modular, OSHA-compliant aluminum crossovers provide safe access over pipes, ducts, and equipment common in data centers. Bolt-together, reconfigurable designs install fast–no welding or fabrication—reducing downtime and fall risk. Learn more or contact Banks Industrial Group to design and install the right ErectaStep solution.

Pipe Insulation Systems
Protect critical piping from heat loss, condensation, corrosion, and freeze damage. BIG delivers turnkey industrial pipe insulation that boosts energy efficiency, improves safety, and prevents costly failures. Click to learn more or contact Banks Industrial Group to design the right insulation solution for your data center.

Air Handler Maintenance Access Platforms
OSHA-compliant, prefabricated aluminum platforms provide safe, stable access to air handlers without ladders. Modular, corrosion-resistant systems install fast, reduce fall risk, and keep critical cooling equipment serviceable. Click to learn more–or contact Banks Industrial Group to discuss a site-specific solution.

Roof Access Stairs
Permanent, OSHA-compliant roof access that replaces unsafe caged ladders. Banks Industrial Group designs and installs prefabricated aluminum stair systems from ErectaStep and Upside Innovations—fast to install, durable, and maintenance-free. Click to learn more or contact BIG for a turnkey solution.

Loading Dock Concrete Repair
Fast-curing epoxy mortar repairs restore spalled, cracked dock concrete around levelers, bumpers, pits, and drains—often returning operations the same day. Stronger than concrete, feather-edged, and impact-resistant, our repairs minimize downtime, improve forklift safety, and extend service life. Click to learn more or contact BIG for rapid support.

Drain Grate Repair
Fast Concrete Restoration Around Drains & Sumps
Repair crumbled concrete and damaged areas around drain grates to reduce trip hazards, protect equipment, and restore safe drainage. BIG delivers rapid-curing, high-strength repairs—often ready for same-day service—with chemical-resistant options for harsh environments. Click to learn more or contact BIG for a fast assessment.

Flexible Safety Bollards
Protect People & Critical Infrastructure
Flexible polymer bollards from A-SAFE, supplied and installed by Banks Industrial Group, absorb forklift impacts and rebound without damaging floors or equipment—unlike steel. Ideal for data center traffic zones, exits, and equipment protection. Click to learn more or contact BIG for a site-specific solution.

Loading Dock Stairs
Safe, Code-Compliant Access for Critical Operations
Prevent slips, falls, and downtime with prefabricated aluminum loading dock stairs installed by Banks Industrial Group. OSHA/IBC/ADA-compliant, corrosion-resistant, and adjustable for uneven docks, these fast-install stairs restore safe access at data centers. Click to learn more—or contact BIG for a fast quote and expert guidance.

Aluminum Canopies & Awnings
Protect critical entrances and loading docks from rain, snow, and runoff with prefabricated aluminum canopies. Rust-free, code-compliant systems feature internal drainage to keep walkways dry, safe, and operational. Fast installation, custom layouts, and long life cycles—contact BIG for a tailored solution.

Generator Maintenance Platforms
OSHA-compliant, prefabricated aluminum platforms provide safe, stable access and workspace for generator maintenance and load testing—eliminating the need for ladders and improving efficiency. Modular, slip-resistant, and weather-proof. Click to learn more or contact Banks Industrial Group for a fast, site-specific solution.

Chiller Tube Sheet Coating
Protect critical chiller tube sheets, end caps and water boxes from corrosion, leaks, and efficiency loss with fast, cold-applied Belzona coatings. Banks Industrial Group restores and protects tube sheets on-site—minimizing downtime, extending equipment life, and avoiding costly replacements. Click to learn more or contact BIG to keep data center cooling systems reliable.
Checkout our tube sheet restoration step-by-step case study.

Compressor Elbow Repair
Corrosion under insulation can weaken compressor elbows, economizers and chiller barrels, risking leaks, efficiency loss, and unplanned downtime. Banks Industrial Group restores strength on-site using cold-applied composite wraps and protective coatings—no hot work, minimal disruption. Extend equipment life, avoid replacement delays, and keep critical cooling systems reliable. Click to learn more or contact BIG for fast support.

Anti-Slip Coatings for Critical Areas
Durable, fast-curing anti-slip coatings reduce slip-and-fall and forklift skidding risks on ramps, walkways, stairs, and service areas. Banks Industrial Group delivers long-lasting epoxy and urethane systems that outperform tapes and paints—minimizing downtime and improving safety. Click to learn more or contact BIG to assess your risk areas.

Industrial Grout
Fast, Durable Equipment Foundation Repair
Restore eroded pump and equipment foundations without shutdowns. BIG’s industrial grouting services use fast-curing, non-shrinking epoxy and specialty grouts to rebuild bases, fill voids, and dampen vibration. Stronger than concrete and chemically resistant, our solutions stabilize equipment, reduce maintenance risk, and extend service life. Click to learn more or contact BIG to discuss your application.

Pump Repair & Coating
Restore Performance. Prevent Failure.
Avoid costly pump replacement and unplanned downtime. BIG repairs and restores worn, corroded, or eroded pumps using cold-applied Belzona composites and protective coatings. We rebuild critical components, improve efficiency, and extend service life—fast, safe, and without hot work. Click to learn more or contact BIG for a repair assessment.

Expansion Joint Repair & Sealing
Leaking or failed expansion joints can allow water, chemicals, and debris to damage concrete and critical infrastructure. Banks Industrial Group provides rapid-cure, solvent-free expansion joint repair using flexible Belzona polymers—restoring movement, sealing out leaks, and minimizing downtime. Click to learn more or contact BIG for a long-term solution.

Pipe Corrosion Repair
Repair corroded, thin-wall, or leaking pipes without replacement. Banks Industrial Group uses engineered composite wraps and protective coatings to restore strength, stop leaks, and prevent future corrosion—often while systems remain online. Reduce downtime, extend asset life, and maintain reliability. Click to learn more or contact BIG for a fast assessment.

Cooling Tower Basin Repair & Coating
Seal Leaks. Stop Corrosion. Extend Service Life.
BIG repairs and coats metal and concrete cooling tower basins to stop leaks, prevent corrosion, and protect against chemical attack. Fast-curing, immersion-rated polymer coatings restore integrity, reduce water loss, and extend equipment life—at a fraction of replacement cost. Click to learn more or contact BIG for expert support.

Fan Blade Rebuild & Coating
Restore Efficiency. Prevent Failure.
Eroded cooling tower fan blades reduce airflow, increase vibration, and strain critical cooling systems. Banks Industrial Group rebuilds worn blade edges with durable polymer composites and applies protective coatings to restore efficiency, reduce future erosion, and extend service life—at a fraction of replacement cost. Click to learn more or contact BIG.

Shaft Rebuild
Rapid, In-Situ Repair for Critical Rotating Equipment
Restore worn or damaged shafts without welding, machining, or disassembly. Banks Industrial Group rebuilds shafts, bearing seats, and keyways on site using proven polymeric metal technology—minimizing downtime and avoiding hot work. Durable, precise repairs extend equipment life and keep cooling and mechanical systems running. Learn more or contact BIG to get started.

Tank Base Sealing
Stop Water Intrusion. Prevent Corrosion.
Protect tank bottoms from hidden corrosion caused by water seeping under the chime. BIG’s polymeric tank base sealing creates a flexible, breathable barrier that keeps moisture out while allowing trapped water to escape. Long-lasting, hot-work-free installation improves reliability and reduces costly repairs. Click to learn more or contact BIG.

Tank Repair
Fast, No-Hot-Work Tank Restoration
Banks Industrial Group uses cold-applied Belzona composites, plate bonding, and protective coatings to restore integrity and extend tank life—often while systems remain in service. Click to learn more or contact BIG for a fast, site-specific solution.

Tank Insulation Systems
Reduce energy loss, protect stored fluids, and lower operating costs with BIG’s maintenance-free tank insulation. Our vertical-panel systems install quickly—even while tanks remain in service—providing durable, weatherproof thermal control for critical data center support systems. Click to learn more or contact Banks Industrial Group for a custom solution.
Read our blog about insulated tank maintenance best practices.

Roof Leak Sealing
Stop Leaks. Protect Critical Assets.
Prevent water intrusion before it threatens equipment, electrical systems, and uptime. Banks Industrial Group delivers seamless, liquid-applied roof leak sealing that bonds to complex roof details, remains flexible, and cures fast—even in wet or cold conditions. Click to learn more or contact BIG for rapid, long-term protection.

Safety Railings
Protect workers at height with OSHA-compliant, non-penetrating safety railings. BIG supplies modular, lightweight aluminum railing systems that install fast, require no tools, and won’t damage rooftops. Ideal for data center roof access, maintenance zones, and temporary work areas. Contact Banks Industrial Group for a tailored fall-protection solution.
Cut-away view of repair.
Final repair completed.
SF6 Gas Leak Repair
Seal hazardous SF₆ leaks in electrical switchgear without shutdown. BIG applies Belzona SF6-FIX to quickly reduce leaks to undetectable levels, protecting equipment reliability while preventing costly emissions of this potent greenhouse gas. Rapid, cold-applied repairs minimize downtime. Contact Banks Industrial Group to learn how BIG restores system integrity and environmental compliance.